The Pollinator

Mila is a good friend, and she has carried the hash torch for countless connoisseurs. She has spent much of her life learning and teaching how to extract more resin from cannabis. She invented and popularized the Pollinator, a motorized cylindrical-shaped sieve to separate resin powder from leaf and buds. Mila has many ongoing experiments with hash and cannabis, one of which includes teaching the doctors in

This container holds all the different hashes Mila made in Kazakhstan, Central Europe. Every time she found some likely wild cannabis, she would sieve it to extract the hash. Mila used a Global Positioning System (GPS) to pinpoint plant locations for future trips.

The Resin Heaven from Portland, Oregon, USA, w/ris the first rolling tray equipped with a screen to collect resin.

I sifted the I50p screen for about a minute and collected enough hash for a flying hit!

mis 1001 oox was loaaea oy an amaaous swiss grower. He made hash from each crop he grew during the last two years.

Sieving low-quality leaves is just about as much trouble as it is worth. The leaf is unsmokcible, but still har bors o little bit of resin.

Kazakhstan to grow medicinal cannabis.

The Pollinator consists of a drum that turns inside a box. Cold, dried cannabis is placed inside the drum that is made from 150-micron screen. A motor turns the drum, and resin glands fall through the 150-micron screen as the cannabis tumbles inside. Resin is collected below the drum.

Highest quality resin falls through the screen first. Progressively lower quality resin falls through the mesh the longer the drum turns. More green matter and other adulterants fall through the screen when the Pollinator turns for longer periods of time.

First you must prepare the dry cannabis. Put it in an airtight bag, and place the bag in the freezer for two hours. This will make the cannabis hard and brittle, which makes the sieving process much more efficient and productive.

Let the drum turn for two to five minutes. Use a short-range kitchen timer to make sure not to let the drum run too long. As the drum turns, the purest resin falls through the screen first, The THC-rich resin falls onto the bottom of the box underneath the drum.

Pollinator Drum

Open the lid of the Pollinator, and lift out the sitkscreen drum Pick up the drum and remove it from the containing box.

Remove (he magnetic lid from the dram, and crdd small leaves and buds, Do not put any sharp sticks or objects into the drum, because they could damage it.
rill the drum about half full of dry leaf material so the cannabis will have enough room to tumble inside. This action is important to facilitate resin gland separation from foliage,
Pollinator Cannabis

Put the lid back on the drum, and set it back in the Pollinator. Close the top ol the Pollinator, and turn it on far the first turning period.

Open the lid of the Pollinator, and lift out the sitkscreen drum Pick up the drum and remove it from the containing box.

Put the lid back on the drum, and set it back in the Pollinator. Close the top ol the Pollinator, and turn it on far the first turning period.

What Sieve For Weed
Rem ove the drum, and scrape the resin from the bottom of the box. Collect the dry resin, and press it into hash.

An inexpensive microscope enables a magnified view of the resin. To grade the resin, make several batches. The first batch should turn for two to five minutes, second batch five to six minutes, and the third more than six minutes. Inspect each batch of resin with the microscope. You will see progressively more debris in the batches that turned longer.

Growing Soilless

Growing Soilless

This is an easy-to-follow, step-by-step guide to growing organic, healthy vegetable, herbs and house plants without soil. Clearly illustrated with black and white line drawings, the book covers every aspect of home hydroponic gardening.

Get My Free Ebook


Post a comment